Print

2006 - Current

After some time looking around for a new location, the club found a spot in an industrial complex building right on 25th Avenue back in Broadview. Ironically, it's less than a mile from our Roosevelt Road location, so we've come full circle back near the IHB tracks. Unfortunately at this location, we don't have a direct view of the tracks from our layout space. We held our first meeting in our new space on September 8, 2006.

 

 

Once a location was determined and accepted, a review of the old layout was done. The club determined that the space we had available would not allow us to resurrect the old layout in any shape or form. A decision was made to restart the layout from scratch, but to plan into the layout methods that can be used to dismantle the pieces more easily than our last design. Several of the more scenic pieces of the old layout were salvaged and stored on-site to be used at a later date for photography or other display options.

Construction has continued since September 2006. All mail line track work and much of the other track work areas has been laid out in its proposed position, except for the steel mill complex. Members of the club are feverishly working on finishing the mainline track equipment installation, i.e. tortoise motors, switches, bus wiring, control wiring, etc. Once all this equipment is in, main line track can be used for running trains.

2008 Update

On April 12 and 13, 2008, the club will host its first open house at 25th Avenue. We hope to have both main line tracks running completely from helix to helix on the top and bottom portions of the layout. The work continues feverishly to try to accomplish this task. Trains will be running on the layout, even if they can't go everywhere on the main line. After several years, members will be happy to be able to run trains again!

2009 Update

Work continues on the main layout while work starts on our one-trak portable layout to be used at shows. Two open houses held this year.

2010 Update

One track modules go to our first off site running at the All American Railroad Show National Model Railroad Association DuPage Division

2011 Update

Two open house this year plus running at All American Railroad Show National Model Railroad Association DuPage Division and Southland Model Railroad Show held at Richards High School

The west helix is complete including facia on all sides. The logging mill and logging camp is complete. The Dells area along with the adjacent passenger statins is complete. The power plant area is complete. The engine servicing area is complete.

The_Layout_with_locations.jpg

2012 update

Work continues on the steel mill, the refinery and industrial area, the intermodel area, the auto rack unloading area, the grain mill and the town on the east helix. We display our portable layout at World's Greatest Hobby on Tour show. Open house held in January.

2013 Update

LT show layout was 17x26
Richards Show... John's module at show

2014 Update

DCC system extended to main layout project started in May, shakedown testing through end of year.
Grayslake show also attended in 2014

2015 Update

Main layout running DCC.
Derailment contest started. First annual winner recognized.

2016 Update

WGH show in January
DC re-introduced to the main layout via the switch mechanism. We have found that it's difficult to go back to DC!